Recovering Lost Data; Restore Recording Feature; Main Screen - Q-See DVR User Manual

Q-See Q25DVR4ES User's Manual
Chapter 4: System Boot - 4.2 Recovering Lost Data
The system will automatically recover lost
data.
A Power Error can cause data to be lost.
Chapter 4: System Boot - 4.3 Restore Recording Feature
Chapter 4:System Boot - 4.4 Main Screen
While the DVR is running, the monitor
10%
as well as the following:
Upper left: Percentage of hard drive
space used.
Middle: Channel name (CH 1 through
CH 4).
Bottom right: Date and Time.
Bottom left: Mode, Status, Hard Drive
Info,and Schedule Setting of the DVR.
Refer to 6.1 Start Recording
Page 7
If a Power Error occurs during
recording process, the system will
automatically resume recording after
power is restored.
will display the view from the cameras
Q-See Q25DVR4ES User's Manual
1 DVR Event List
3. Save DVR's Recorded Video to PC
5. Load Video File Saved in PC
7. Play PC Video File
9. Playing Scroll Bar
11. Previous Frame
13. Pause
15. Next Frame
17. Volume Scroll Bar (not used by this unit)
Press to open the event video list.
2. Capture one frame picture
4. Configuration
6. Play DVR Video File
8. Channel Selection Keys
10. Fast backward
12. Play Backward
14. Play
16. Fast Forward
18. Exit
Page 20