Emergency Mode - Fujitsu Arrows NX F-01J Instruction Manual

◆ Switching the portrait/landscape view
The terminal supports a motion sensor that senses orientation
or motion of the terminal. You can switch display view by
tilting the terminal vertical or horizontal (Auto-rotate screen→
P123).
･
Even when you change the orientation of the terminal, the
screen may not change depending on the screen displayed.
◆ Screenshot
You can save a screen displayed on the terminal as an image.
･
Some screens may not be saved.
Press P and volume down key at the same
1
time (1 sec. or more)
Screen shot is saved and
･
Flick the status bar downward to open the Notification
panel.(→P50)To check the image, tap a notification for
screenshot→Select an application, or from the Home
screen, tap [Album-Scene].
appears on the status bar.

◆ Emergency mode

In case of emergency such as disaster, reduce the battery
consumption by restricting the screen brightness or turning off
functions.
Press and hold P until the phone options menu
1
appears
2
[Emergency mode]→[OK]
The terminal restarts and Emergency mode is set.
･
To cancel the setting, perform the same operations
again or from the Home screen for Emergency mode,
tap [Stop saving]→[OK].
✔INFORMATION
･
Alternatively, from the Home screen, tap
→[OK] for setting Emergency mode.
･
In Emergency mode, the setting is not canceled by turning
the power off.
38
→[Disaster kit]→
Before using the terminal