Fujitsu Arrows NX F-01J Instruction Manual page 37

◆ Charging with AC adapter
Follow the procedure below to use AC Adapter 05 (optional)
for charging.
a With the side engraved with "B" facing up, insert the
microUSB plug of the AC adapter horizontally into the
external connection jack
b Insert the AC adapter power plug into an outlet
･
The indicator LED on the terminal lights up red while
charging, and turns off when charging is complete.
･
The indicator LED on the AC adapter lights up green
when the battery can be charged properly.
c When charging is complete, remove the AC adapter's
power plug from the outlet
d Remove the microUSB plug of the AC adapter horizontally
from the external connection terminal of this terminal
micro USB
plug
Indicator LED
◆ Charging with a PC
You can charge the terminal via a PC using Micro USB Cable
01 (optional) etc.
･
When a screen of new hardware detection or operation
selection appears on the PC, select [キャンセル (Cancel)].
35
Indicator LED
External
connection jack
Power plug
AC adapter
Before using the terminal
To 100V
AC outlet