Fujitsu Arrows NX F-01J Instruction Manual page 123

Notification access : Set whether to permit the access of
the application that can access to notifications.
Do Not Disturb access : Set [Do not disturb] to manage
applications that access to the notification contents that
have not been notified.
Vibrate on touch : Set whether to notify you of touch
recognition by vibration.
Touch sounds : Set whether to sound when selecting
menu.
Dial pad touch tones : Set whether to sound when
operating the dial pad.
Screen locking sounds : Set whether to sound when
setting and canceling screen lock.
･
This option is enabled only when Security unlock
preference is set to other than [None] (→P138).
Dolby Audio : Setting steps→P122
◆ Volumes
You can adjust volume of media sound, alarm sound,
ringtone.
･
You cannot set while Manner mode is enabled.
1
From the Home screen,
[Sound/Vibration/LED]→[Volumes]
2
Slide the slider to adjust sound volume
✔INFORMATION
･
When [Ring volume] is set to 0, the vibration turns to ON. To
set the vibration OFF, set it to the Manner mode (Silent). →
P122
→[Settings]→
121
❖
Do not disturb
Perform the settings about notifications or set Automatic rules
when "Do not disturb" is set to "Priority only allows".
1
From the Home screen,
[Sound/Vibration/LED]→[Do not disturb]
2
Set the function or date and time to notify by
[Priority only allows] and [Automatic rules]
✔INFORMATION
･
To set [Do not disturb] to ON, open the Notification panel→
tap [Do not disturb] on the panel switch→[Total silence]/
[Alarms only]/[Priority only]→[Until you turn this off] or set
the time→Tap [DONE].
◆ Manner mode
Set/Cancel Manner mode.
･
You can change the Manner mode type.→P122
1
From the Home screen,
[Sound/Vibration/LED]→[Manner mode]
2
Set [Manner mode] to ON
･
When Manner mode is set, the status icon appears on
the status bar. Icons vary depending on the Manner
mode type. For details about each icon, see "Icons on
the status bar".→P48
→[Settings]→
→[Settings]→
Settings