Fujitsu Arrows NX F-01J Instruction Manual page 126

◆ Touch and go display
Double-tap the screen to set to cancel/set sleep mode.
1
From the Home screen,
[Display & Wallpaper]
2
Mark/Unmark [Touch and go display]
✔INFORMATION
･
When the glove touch function (→P148) is set to ON, the
touch and go display function is not available with hands in
gloves.
･
If "Touch and go display" is set to ON, it leads to quicker
battery consumption than OFF status.
◆ Screen timeout
❖
Sleep
Set time until the screen turns off.
1
From the Home screen,
[Display & Wallpaper]→[Screen timeout]
2
[Sleep]→Select time
→[Settings]→
→[Settings]→
124
❖
Keep lit when held
Set whether to keep the screen backlight on while the terminal
is in motion, held in hand.
1
From the Home screen,
[Display & Wallpaper]→[Screen timeout]
2
Mark/Unmark [Keep lit when held]
◆ Daydream
Set screen saver which is displayed when the terminal goes
into the sleep mode while charging.
1
From the Home screen,
[Display & Wallpaper]→[Daydream]
2
Tap the button in the upper right of the screen
to set [Daydream] to ON
3
Select an application→ →Set each item
･
Tap [MENU]→[Start now] to activate Daydream.
→[Settings]→
→[Settings]→
Settings