Synergy 3200 handset & charger ~ 2nd Edition ~ 16th October '02 ~ 4686
Setting up
Follow these steps to set up your Synergy 3200 SMS Handset and
Charger ready for use.
Plan the location
Position your Synergy 3200 SMS within 2
metres of a power socket otherwise extension
cables will be required.
Make sure it is at least 1 metre away from
other electrical products to avoid interference.
Do not place your Synergy 3200 SMS product
in the bathroom or other humid areas.
Connect the power supply to
1
the charger
Plug the power adaptor into the mains power
socket on the underside of the charger.
Plug the adaptor into the mains power supply
and switch on. The green Power/In use light
comes on.
Note
The charger must be plugged into the mains power
socket at all times.
2
Install the batteries
2 x NiMH AAA rechargeable batteries are
supplied.
Install the batteries as shown.
Slide the battery compartment cover into place
(the battery cover may be found in the
packaging with the batteries).
10