Table of Contents
Advertisement
Synergy 3200 handset & charger ~ 2nd Edition ~ 16th October '02 ~ 4686
Register your handset to the
4
Synergy 3200 SMS base
Note
Please note that if you are registering your
handset to a different make of base station,
you should put the base into registration mode
following the instructions in the base station
user guide. Please ensure the base is GAP
compatible.
At the base:
Press and hold the base PAGE
Page
button for at least 10 seconds, until
you hear the validation tone (two
beeps), then release the button.
At the handset:
Press the
button to enter the
menu.
Press the UP or DOWN button to
Vol
scroll to Registration and press
the
button.
The display will show Base 1-4.
There will be a tick to indicate the
other bases that the handset is
already registered to.
Enter the base number (1-4) that
you want to register the handset to.
Enter your 4-digit PIN (original
setting OOOO) and press the
button.
SMS
The display will show Base search
1, 2, 3, 4 and the
flash as the handset tries to locate
the base.
When the handset locates the base,
the handset will be automatically
selected and shown on the display.
(If the handset does not locate the
base, the handset will return to the
previous menu. Try to register again
by using a different base number.
Ensure that you are close to the base).
Press the
button to confirm. The
handset is registered.
Note
Your 4 digit PIN number is 0000 unless you have
already allocated a new PIN number as explained
in your main base station user guide.
symbol will
12
Advertisement
Table of Contents
