Table of Contents
Advertisement
Synergy 3200 handset & charger ~ 2nd Edition ~ 16th October '02 ~ 4686
To set the dialling mode
Your Synergy 3200 SMS is set to
tone dialling. If required, you can
switch to pulse dialling.
Press the
button to enter the
menu.
Use the DOWN button to
Vol
scroll to Setup and press the
button.
Use the DOWN button to
Vol
scroll to Dialling Mode and press
the
button.
Use the UP or DOWN button to
select either Tone or Pulse.
Vol
Press the
button. You will hear
a confirmation beep.
Press and hold the
return to standby.
✘
button to
To automatically insert an access
code followed by a pause
With some switchboards it may be
necessary to insert a pause after
entering the switchboard access
code, e.g. 9, 11 etc to enable you to
get an outside line.
If you use your Synergy 3200 SMS
with two separate switchboards, you
can set two separate access codes.
Then you can simply select which
switchboard you are using your
phone with.
This feature can also automatically
insert a pause between the access
code and the phone number stored
in the Phonebook.
You can then select which
switchboard you want your Synergy
3200 SMS to work with.
Press the
button to enter the
menu.
Use the DOWN button to scroll to
Vol
Setup.
Press the
button.
Use the DOWN button to scroll to
Vol
PABX Setup.
Press the
button.
36
Advertisement
Table of Contents
