Troubleshooting Your Phone; Power And Startup; Access To Systems; Microsoft Office Communicator 2007 R2 - Polycom CX300 User Manual

Troubleshooting Your Phone

Power and Startup

Symptom
There are power issues.
The handset appears to be fine,
but there is no interaction
between the handset and the
Microsoft Office Communicator
2007 R2 client.
This chapter presents problems, likely causes, and corrective actions.
Problems are grouped as follows:
• Power and Startup
• Controls, Placing and Receiving Calls
•

Access to Systems

• Audio
•

Microsoft Office Communicator 2007 R2

If you still need assistance, contact your system administrator.
Problem
The Polycom CX300 desktop
phone has no power.
There may be problems with
your Microsoft Office
Communicator 2007 R2 client
software or with the Microsoft
Office Communications Server
2007 software.
Corrective Action
Do one of the following steps:
• Verify that no lights appear on the unit
when it is powered up.
• Verify that the USB port provides
power.
• Try the phone in another USB port
where the power is known to be
working.
Note: The phone will not work if it is
connected to bus-powered USB hub.
Contact your system administrator to
ensure your account is configured
properly and that your Microsoft Office
Communicator 2007 R2 client software
and the Microsoft Office Communications
Server 2007 software are properly
installed and configured.
3
3 - 1