Xconfiguration Userinterface Osd Halfwakemessage; Xconfiguration Userinterface Custommessage; Xconfiguration Userinterface Keytones Mode; Xconfiguration Userinterface Language - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xConfiguration UserInterface CustomMessage

A custom message can be displayed, in the lower left side of the screen, in awake mode.
Requires user role: ADMIN, INTEGRATOR
Default value: ""
USAGE:
xConfiguration UserInterface CustomMessage: "CustomMessage"
where
CustomMessage
: String (0..128)
Add a custom message. Add an empty string to remove a custom message.

xConfiguration UserInterface KeyTones Mode

You can configure the system to make a keyboard click sound effect (key tone) when typing text
or numbers.
Requires user role: ADMIN, USER
Default value: On
USAGE:
xConfiguration UserInterface KeyTones Mode:
where
Mode
: Off/On
Off: There is no key tone sound effect.
On: The key tone sound effect is turned on.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
Mode
xCommand

xConfiguration UserInterface Language

Select the language to be used in menus and messages on the screen and Touch controller.
Requires user role: ADMIN, USER
Default value: English
USAGE:
xConfiguration UserInterface Language:
where
Language
: Arabic/Catalan/ChineseSimplified/ChineseTraditional/Czech/Danish/Dutch/English/
EnglishUK/Finnish/French/FrenchCanadian/German/Hebrew/Hungarian/Italian/Japanese/
Korean/Norwegian/Polish/Portuguese/PortugueseBrazilian/Russian/Spanish/SpanishLatin/
Swedish/Turkish
Select a language from the list.

xConfiguration UserInterface OSD HalfwakeMessage

A custom message can be displayed in the middle of the main screen when the system is in
the half wake state. This will replace the default message "Tap the touch panel to get started"
together with an illustration of a Touch panel. You can also choose not to have a message.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration UserInterface OSD HalfwakeMessage: "HalfwakeMessage"
where
HalfwakeMessage
: String (0..128)
Add a custom message. If you add a space, there will be no visible message. Add an
empty string to remove a custom message.
97
API Reference Guide
xStatus Appendices
Language
Copyright © 2017 Cisco Systems, Inc. All rights reserved.