Cisco TelePresence MX700 and MX800
Introduction
xCommand Call UnattendedTransfer
Transfers an ongoing call to another participant. Fully supported for SIP calls only.
Requires user role: ADMIN, USER
USAGE:
xCommand Call UnattendedTransfer CallId:
where
CallId: Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During a call you can
run the xStatus Call command to see the CallId.
Number: String (0, 255)
The number the call is transfered to.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API
xConfiguration
CallId
Number: "Number"
xCommand
xCommand
CallHistory commands
xCommand CallHistory AcknowledgeAllMissedCalls
Turns off the missed calls indicator on the touch controller for all missed calls.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory AcknowledgeAllMissedCalls
xCommand CallHistory AcknowledgeMissedCall
Turns off the missed calls indicator on the touch controller for the specified call.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory AcknowledgeMissedCall CallHistoryId:
[AcknowledgeConsecutiveDuplicates: AcknowledgeConsecutiveDuplicates]
where
CallHistoryId: Integer (1..2147483647)
CallHistoryId for the call in question. Run xCommand CallHistory Get to get the id
number.
AcknowledgeConsecutiveDuplicates: False/True
You can include or exclude all surrounding calls with duplicate information. The default
is set to False.
xCommand CallHistory DeleteAll
Deletes all information on previous calls.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory DeleteAll [Filter: Filter]
where
Filter: All/Missed/Placed/Received
You can filter which calls to delete. The default is set to All.
121
API Reference Guide
xStatus
Appendices
CallHistoryId
Copyright © 2017 Cisco Systems, Inc. All rights reserved.