Xconfiguration Video Input Connector [1..5] Inputsourcetype - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xConfiguration Video Input Connector [1..5] InputSourceType

Select which type of input source is connected to the video input. For single camera systems,
the integrated camera is connected to Connector 1. For dual camera systems, the integrated
cameras are connected to Connector 1 and Connector 2.
Requires user role: ADMIN, INTEGRATOR
Default value: Connector 1 and 2: camera Connector 3 and 4: PC Connector 5: other
USAGE:
xConfiguration Video Input Connector
where
n
: Unique ID that identifies the video input connector. Range: 1..5
InputSourceType
: camera/document_camera/mediaplayer/PC/whiteboard/other
Camera: Use this when a camera is connected to the video input.
Document_camera: Use this when a document camera is connected to the video input.
Mediaplayer: Use this when a media player is connected to the video input.
PC: Use this when a computer is connected to the video input.
Whiteboard: Use this when a whiteboard camera is connected to the video input.
Other: Use this when the other options do not match.
xConfiguration Video Input Connector [1..5] Name
Define a name for the video input connector.
Requires user role: ADMIN, INTEGRATOR
Default value: Connector 1: "Camera 1" Connector 2: "" for single camera systems,
"Camera 2" for dual camera systems Connector 3: "PC (HDMI)" Connector 4: "PC (VGA)"
Connector 5: ""
USAGE:
xConfiguration Video Input Connector
where
n
: Unique ID that identifies the video input connector. Range: 1..5
Name
: String (0, 50)
Name for the video input connector.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
n InputSourceType: InputSourceType
n Name: "Name"
xCommand
xConfiguration Video Input Connector [1..4] PresentationSelection
Define how the video system will behave when you connect a presentation source to the video
input. In general, any input source can be used as a presentation source; normally, the main
camera will not be used as a presentation source.
If the video system is in standby mode, it will wake up when you connect a presentation source.
Sharing the presentation with the far end requires additional action (select Share on the user
interface) except when this setting is set to AutoShare.
Requires user role: ADMIN, INTEGRATOR
Default value: Connector 1, 2: Manual Connector 3, 4: OnConnect
USAGE:
xConfiguration Video Input Connector
PresentationSelection
where
n
: Unique ID that identifies the video input connector. Range: 1..4
PresentationSelection
: Connector 1: Manual Connector 2: AutoShare/Desktop/Manual/
OnConnect for single camera systems, and Manual for dual camera systems Connector 3,
4: AutoShare/Desktop/Manual/OnConnect
AutoShare: While in a call, the content on the video input will automatically be presented
to the far end as well as on the local screen when you connect the cable, or when the
source is activated otherwise (for example when a connected computer wakes up from
sleep mode). You do not have to select Share on the user interface. If a presentation
source is already connected when you make or answer a call, you have to manually
select Share on the user interface.
Desktop: The content on the video input will be presented on the screen when you
connect the cable, or when the source is activated otherwise (for example when a
connected computer wakes up from sleep mode). This applies both when idle and in a
call. Also, the content on the video input will stay on the screen when you leave the call,
provided that it was the active input at the time of leaving.
Manual: The content on the video input will not be presented on the screen until you
select Share from the user interface.
OnConnect: The content on the video input will be presented on screen when you
connect the cable, or when the source is activated otherwise (for example when a
connected computer wakes up from sleep mode). Otherwise, the behavior is the same
as in manual mode.
102
API Reference Guide
xStatus Appendices
n PresentationSelection:
Copyright © 2017 Cisco Systems, Inc. All rights reserved.