Cisco TelePresence MX700 and MX800
Introduction
xConfiguration Proximity Services ContentShare FromClients
Enable or disable content sharing from Proximity clients. When this setting is enabled, you can
share content from a Proximity client wirelessly on the video system, e.g. share your laptop
screen. This service is supported by laptops (OS X and Windows). Proximity Mode must be On
for this setting to take any effect.
Requires user role: ADMIN, USER
Default value: Enabled
USAGE:
xConfiguration Proximity Services ContentShare FromClients:
where
FromClients
: Enabled/Disabled
Enabled: Content sharing from a Proximity client is enabled.
Disabled: Content sharing from a Proximity client is disabled.
xConfiguration Proximity Services ContentShare ToClients
Enable or disable content sharing to Proximity clients. When enabled, Proximity clients will
receive the presentation from the video system. You can zoom in on details, view previous
content and take snapshots. This service is supported by mobile devices (iOS and Android).
Proximity Mode must be On for this setting to take any effect.
Requires user role: ADMIN, USER
Default value: Disabled
USAGE:
xConfiguration Proximity Services ContentShare ToClients:
where
ToClients
: Enabled/Disabled
Enabled: Content sharing to a Proximity client is enabled.
Disabled: Content sharing to a Proximity client is disabled.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API
xConfiguration
xConfiguration
FromClients
ToClients
xCommand
RoomAnalytics configuration
xConfiguration RoomAnalytics PeoplePresenceDetector
The video system has the capability to find whether or not people are present in the room, and
report the result in the RoomAnalytics PeoplePresence status. This feature is based on ultra-
sound. It takes a minimum of 2 minutes to detect whether people are present or not in the room,
and it may take up to 2 minutes for the status to change after the room becomes vacant.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: Off
USAGE:
xConfiguration RoomAnalytics PeoplePresenceDetector:
where
PeoplePresenceDetector
: Off/On
Off: The video system's status does not show whether or not there are people present
in the room.
On: The video system's status shows whether or not there are people present in the
room.
86
API Reference Guide
xStatus
Appendices
PeoplePresenceDetector
Copyright © 2017 Cisco Systems, Inc. All rights reserved.