Time Status; Xstatus Time; Xstatus Time Zoneolson; Xstatus Time Systemtime - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction

Time status

xStatus Time

Shows the top level overview of the time status.

xStatus Time ZoneOlson

Shows the current time zone in Olson format.
Value space of the result returned:
<String>
Example:
xStatus Time ZoneOlson
*s Time ZoneOlson: Europe/Berlin
** end

xStatus Time SystemTime

Returns the date and time set on the system.
Value space of the result returned:
<String>
Example:
xStatus Time SystemTime
*s Time SystemTime: "2014-04-25T10:04:03Z"
** end
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration

UserInterface status

xStatus UserInterface OSD Output

xStatus UserInterface OSD Mode

215
xCommand
Indicates which monitor is used for on-screen display output.
Value space of the result returned:
<Integer>
Example:
xStatus UserInterface OSD Output
*s UserInterface OSD Output: 1
** end
Returns the status of the endpoint's on screen display.
Full: The on screen display is set as the primary user interface and all menu features are available.
Indicators: On screen display is not set as the primary user interface. Only indicators and messages
are available.
Value space of the result returned:
<Full/Indicators>
Example:
xStatus UserInterface OSD Mode
*s UserInterface OSD Mode: Indicators
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.