Cisco TelePresence MX700 and MX800
Introduction
xCommand Video Output Monitor Gamma Set
Adjust the gamma level on the monitor.
Requires user role: ADMIN
USAGE:
xCommand Video Output Monitor Gamma Set Position:
where
Position: Left/Right
Choose whether to apply the command to the left or right integrated screen. This
parameter is only present for video systems with two integrated screens (dual screen
systems).
Value: 1.5/1.6/1.7/1.8/1.9/2.0/2.1/2.2/2.3/2.4/2.5/2.6/2.7
Select the level.
xCommand Video Output Monitor Reset
Reset monitor settings.
Requires user role: ADMIN
USAGE:
xCommand Video Output Monitor Reset Position:
where
Position: Left/Right
Choose whether to apply the command to the left or right integrated screen. This
parameter is only present for video systems with two integrated screens (dual screen
systems).
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API
xConfiguration
Position
Value:
Value
Position
xCommand
xCommand
xCommand Video Output Monitor Sharpness Set
Adjust the image sharpness on the monitor.
Requires user role: ADMIN
USAGE:
xCommand Video Output Monitor Sharpness Set Position:
where
Position: Left/Right
Choose whether to apply the command to the left or right integrated screen. This
parameter is only present for video systems with two integrated screens (dual screen
systems).
Value: Softest/Soft/Normal/Sharp/Sharpest
Select the level.
xCommand Video PresentationPIP Set
Sets position for the presentation PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE:
xCommand Video PresentationPIP Set Position:
where
Position: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/UpperRight
Select one of the predefined positions.
170
API Reference Guide
xStatus
Appendices
Position
Value:
Value
Position
Copyright © 2017 Cisco Systems, Inc. All rights reserved.