Table of Contents
Advertisement
If you make a call hiding your caller ID, such as by entering a phone
number with "184" for each call, your location information and
phone number are not reported. However, when the Emergency
call acceptance organization deems it necessary for lifesaving
purposes, etc., they may decide to obtain your phone number and
accurate location information from your GPS, regardless of your
settings.
Note that the areas/time for which the "Emergency call location
information" is ready to be used vary depending on the preparatory
state of each Emergency call acceptance organization.
･
When calling 110, 119 or 118 for emergency from the terminal, tell
that you are calling from a mobile phone, and give your phone
number and your current location precisely for checking callback
from the police/fire department. Also, make a point to call in a
stationary position to prevent the call from being dropped. Do not
power off the terminal for at least 10 minutes after the emergency
call just in case the Police or Fire/Ambulance may have to get in
contact with you.
･
Note that you may not connect to the local Fire Department or
Police Station depending on where you are calling from.
･
In Japan, if the docomo nano UIM card is not inserted, emergency
calls 110, 119 and 118 cannot be made on the PIN code entry
screen, during PIN code lock/PUK lock or while updating software.
･
If you make an emergency call with Reject call settings enabled,
Reject call settings will be disabled.
･
Emergency calls may not be available on some networks.
International call (WORLD CALL)
WORLD CALL is an international call service available from DOCOMO
terminals.
･
For WORLD CALL, refer to NTT DOCOMO website.
1
From the Home screen,
and hold [0])
Enter a country code, area-code
→
(city code) and the other party's phone number
→
･
If [Automatic conversion] for [International dial assist] is
marked, "International dial assist" screen appears when
sending. Tap [Convert number] or [Use original number].
･
If an area code (city code) begins with "0", omit "0". However,
"0" may be required to dial to some country or area such as
Italy.
･
When selecting from the country list to enter "+ country code",
enter the area code (city code) and phone number,
[International call]
→
53
[Dial]
+ (Touch
→
→
Select a country
[WORLD CALL].
→
→
Calling
Advertisement
Table of Contents
