Table of Contents
Advertisement
･
The terminal supports microSD cards of up to Class 10 and UHS
Speed Class 1. Speed class just indicates the performance of
microSD cards and it does not guarantee all of operations of the
speed class performance.
･
Do not power off the terminal while loading microSD card or editing
the data of microSD card. Doing so may break the data or may
affect operation of microSD card.
･
Data transfered from the other device to a microSD card may not
be displayed or played on the terminal. Data transfered from the
terminal to a microSD card may not be displayed or played on other
devices.
Installing/Removing microSD card
･
Install/remove after turning off the power.
･
To remove the tray, use the included SIM ejector (sample).
Installing
1
Insert the tip of SIM ejector into the hole for
ejecting tray
→
P.24
2
Draw the tray straight
3
With the metal side facing down, set the
microSD card into the tray in the direction of
the arrow
･
Be sure to fit the microSD card into the tray so that it does not
come off.
4
Keep the terminal in a horizontal state and
firmly insert the tray straight into the end of the
slot
P.25
→
27
→
P.25
Before Using the Terminal
Advertisement
Table of Contents
