Integra DRX-R1.1 Basic Manual page 53

> Specifications > Advanced Setup
■ 7. THX Audio
Setting item Default Value
Back Speaker >4.0 ft/>1.2 m
Spacing
THX Ultra / No
Select Subwoofer
BGC Off
> Listening Modes > Network Functions
Setting Details
Select the distance between the surround back
speakers from "<1.0 ft/<0.3 m", "1.0 - 4.0 ft/0.3
- 1.2 m", and ">4.0 ft/>1.2 m".
• The unit of distance (feet / meters) shown is
the unit selected for use in "Distance".
• If an item cannot be selected even though
connection is correct, check that the settings
in "Configuration" - "Speaker Channels"
matches the number of connected channels.
Set "Yes" or "No" of the connection of the THX
certified subwoofer.
"Yes": When a THX-certified subwoofer is
connected
"No": When a THX-certified subwoofer is not
connected
• The setting cannot be changed if
"Configuration" - "Subwoofer" is set to "No".
If your listening room layout (for practical or
aesthetic reasons) locates most of the listeners
close to the rear wall, the resulting bass level
can be sufficiently reinforced by the boundary
that the overall sound becomes "boomy". THX
Select receivers contain a Boundary Gain
Compensation (BGC) feature to improve bass
balance.
"On": When this function is to be used
"Off": When this function is not to be used
• In the following cases, the setting cannot be
changed:
– "Configuration" - "Subwoofer" is set to
"No".
– "THX Ultra / Select Subwoofer" is set to
"No".
Setting item Default Value
Loudness Plus On
■ 8. EQ for Standing Wave
This controls the affect of the standing waves that occur when sound waves reverberating
off obstacles such as walls interfere with the original sound waves.
Setting Item Default Value
Filter 1-3 0.0 dB
> Basic Manual
Troubleshooting | Supplementary Information, etc.
Setting Details
When the setting is set to "On", it is possible to
enjoy even subtle nuances of audio expression
at low volume. This is only available when the
THX listening mode is selected.
THX Loudness Plus
THX Loudness Plus is a new volume control
technology featured in THX Ultra and THX
Select Certified receivers.
With THX Loudness Plus, home theater
audiences can now experience the rich details
in a surround mix at any volume level.
A consequence of turning the volume below
Reference Level is that certain sound elements
can be lost or perceived differently by the
listener. THX Loudness Plus compensates for
the tonal and spatial shifts that occur when the
volume is reduced by intelligently adjusting
ambient surround channel levels and frequency
response. This enables users experience
the true impact of soundtracks regardless of
the volume setting. THX Loudness Plus is
automatically applied when listening in any THX
listening mode. The new THX Cinema, THX
Music, and THX Games modes are tailored to
apply the proper THX Loudness Plus settings
for each type of content.
Setting Details
1. After selecting the Filter to adjust from "Filter 1"
to "Filter 3" with / , press Enter.
2. Select the frequency with / , then adjust
the attenuation with / . The frequency can
be selected between "63 Hz" and "250 Hz".
Attenuation can be selected between "0.0 dB"
and "12.0 dB" (0.5 dB intervals).
17