Integra DRX-R1.1 Basic Manual page 47

> Specifications > Advanced Setup
■ 5. Analog Audio Input
You can change input assignment between the input selectors and AUDIO IN jacks. If you
do not assign a jack, select "---".
Setting Item Default Value
BD/DVD AUDIO 3
CBL/SAT AUDIO 1
GAME AUDIO 4
STRM BOX AUDIO 2
PC ---
CD AUDIO 5
TV AUDIO 6
PHONO PHONO
> Listening Modes > Network Functions
Setting Details
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the BD/DVD button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the CBL/SAT button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the Game button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the STRM Box button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the PC button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the CD button.
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the TV button.
The setting cannot be changed.
2. Speaker
You can make changes to the connection environment of the speakers and change the
volume level. Settings are automatically configured if you use AccuEQ Room Calibration.
This setting cannot be selected if headphones are connected or audio is output from the
speakers of the TV.
■ 1. Configuration
Setting Item Default Value
Speaker 7.1.4 ch
Channels
Subwoofer 2ch
> Basic Manual
Troubleshooting | Supplementary Information, etc.
Setting Details
Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1
ch", "7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch",
"5.1.2 ch", "6.1.2 ch", "7.1.2 ch", "4.1.4 ch", "5.1.4
ch", "6.1.4 ch", or "7.1.4 ch" to suit the number of
speaker channels connected.
Set the PRE OUT SUBWOOFER jacks which
output audio signals.
"1ch": Only the PRE OUT SUBWOOFER 1 jacks
output audio signals.
"2ch": Both the PRE OUT SUBWOOFER 1 jacks
and the PRE OUT SUBWOOFER 2 jacks output
audio signals.
"No": Neither the PRE OUT SUBWOOFER 1 jacks
nor the PRE OUT SUBWOOFER 2 jacks output
audio signals.
11