Replacing One Type Of Exhaust Filter With Another - Miele HS11 Operating Instructions Manual

 If you are using exhaust filter c or d,
press the TimeStrip® exhaust filter
change indicator.
After approx. 10–15 seconds, a thin red
line will appear in the left hand side of
the display for both exhaust filters.
If you wish to fit the AirClean exhaust
filter, see "Replacing one type of ex-
haust filter with another".
 Close the dust compartment lid.
Replacing one type of exhaust filter
with another
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters:
a AirClean
b AirClean Plus 50 (light blue)
c Active AirClean 50 (black)
d HEPA AirClean 50 (white)
24
Do not use more than one exhaust fil-
ter at a time.
When changing the filter please note
1. If you wish to replace exhaust filter a
with filter b, c, or d, it is essential that
you remove the filter grille before you
fit the new exhaust filter.
If you are using exhaust filter c or d,
you must also activate the
TimeStrip® exhaust filter change in-
dicator.
2. If you wish to replace exhaust filter b,
c, or d with filter a, it is essential that
you also fit the filter grille *.
* Filter grille – see "Optional acces-
sories"