Advertisement

de
Gebrauchsanweisung Bodenstaubsauger
en
Vacuum cleaner operating instructions
fr
Mode d'emploi pour aspirateur traîneau
nl
Gebruiksaanwijzing stofzuigers
it
Istruzioni d'uso per aspirapolvere a traino
HS11
M.-Nr. 09 883 730

Advertisement

Table of Contents
loading

Summary of Contents for Miele HS11

  • Page 1 Gebrauchsanweisung Bodenstaubsauger Vacuum cleaner operating instructions Mode d'emploi pour aspirateur traîneau Gebruiksaanwijzing stofzuigers Istruzioni d'uso per aspirapolvere a traino HS11 M.-Nr. 09 883 730...
  • Page 2: Table Of Contents

    en - Contents Warning and Safety instructions ........24 Caring for our environment .
  • Page 3: Warning And Safety Instructions

    en - Warning and Safety instructions This vacuum cleaner complies with statutory safety requirements. Improper use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the vacuum cleaner, please read these instructions carefully before using it for the first time.
  • Page 4 en - Warning and Safety instructions The vacuum cleaner must only be used to vacuum dry floor surfaces. Do not use on people or animals. Any other usage, modification or alteration is not supported by the manufacturer and could be dangerous. This vacuum cleaner can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are supervised whilst...
  • Page 5 Do not use the vacuum cleaner if the cable is damaged. If the cable is damaged it must be replaced together with a complete cable rewind. For safety reasons this work must be done by the Miele Service Department or a Miele authorised service technician.
  • Page 6 Do not let the vacuum cleaner get wet. Clean only with a dry cloth or slightly damp cloth when disconnected from the mains supply. Repairs should only be carried out by a Miele authorised service technician. Repairs and other work by unqualified persons can cause considerable danger to users.
  • Page 7 Accessories To avoid the risk of injury when vacuuming with a Miele Turbobrush, do not touch the rotating roller brush. It is not advisable to vacuum directly with the handle, i.e.
  • Page 8: Caring For Our Environment

    en - Caring for our environment Disposal of packing material Disposing of your old appliance The packaging is designed to protect the vacuum cleaner from damage Before disposing of your old appliance during transportation. The packaging remove the dustbag and all the filters materials used are selected from and dispose of them with your normal materials which are environmentally...
  • Page 9: Guide To The Appliance

    en - Guide to the appliance...
  • Page 10 Release button for the telescopic tube f Hose connection socket g Dust compartment release catch h Dust compartment filter (for motor protection) i Original Miele dustbag j Floorhead * k Carrying handle l Park system for storage (on both sides of the vacuum cleaner)
  • Page 11: Preparing For Use

    Connect the handle to the suction scratching. hose (dia. 3) Miele offer a range of other floorheads, ^ Insert the suction hose into the brushes and accessories for other handle until it clicks into position.
  • Page 12: Using The Accessories Supplied

    AirTeQ floorhead (dia. 9) Exhaust filter change indicator The exhaust filter change indicator If the suction power of the AirTeQ shows the remaining functional life of floorhead seems too high, reduce the exhaust filter. After approx. 50 the suction until the floorhead is operating hours, or approx.
  • Page 13: Use

    * - for energy-saving vacuuming (this setting is also very quiet) Unwind the mains cable (dia. 19) ( - loop pile carpet ^ Pull the mains cable out to the ) - heavily soiled hard flooring and required length (max. cable length intensive cleaning of carpets approx.
  • Page 14: Setting Down, Transportation And Storage

    Only use genuine dustbags, filters Park system for storage (dia. 26) and accessories with the "Original Miele" logo on them. This will ensure Always disconnect the vacuum that the suction power of the cleaner from the electrical supply vacuum cleaner is maintained, when you have finished using it.
  • Page 15: Purchasing New Dustbags And Filters

    On/Off foot control s and set the Only use original Miele G/N dustbags suction power selector to the highest with a blue collar and original Miele power setting. filters. These are identified by the ^ Lift the floorhead off the floor a little.
  • Page 16: How To Replace The Dustbag

    AirClean Replace this filter every time you start a ^ Close the dust compartment lid new packet of Miele dustbags. An securely, making sure it clicks into AirClean exhaust filter is supplied with position. Take care not to trap the every packet of Miele dustbags.
  • Page 17: How To Replace The Airclean Filter

    How to replace the AirClean filter If you wish to fit an AirClean filter, (dia. 31 + 32) see "Replacing one type of exhaust Do not use more than one exhaust filter with another". filter at a time. ^ Close the dust compartment lid. ^ Open the dust compartment lid.
  • Page 18: How To Replace The Thread Lifters

    Replacement parts are available from gets too hot. your Miele Dealer or from Miele (see end of booklet for contact details). This can occur if, for instance, large articles block the suction tube or when...
  • Page 19: After Sales Service

    In the event of a fault that you cannot Department. easily remedy, please contact – your Miele Dealer, or Floorheads / brushes – Miele (see end of booklet for contact Classic Allergotec floorhead details) (SBDH 285-3) Please note that telephone calls may...
  • Page 20 Parquet Twister XL floor brush with Radiator brush (SHB 30) swivel action (SBB 400-3) For dusting radiators, narrow shelves (only available in selected countries) and crevices. This brush is extra wide making it Mattress nozzle (SMD 10) suitable for large areas of flooring and has a swivel joint enabling it to get into For vacuuming upholstery, mattresses, awkward corners.
  • Page 21: Electrical Connection For The Uk

    Filters Non-rewireable plugs BS 1363 The fuse cover must be re-fitted when Active AirClean 50 exhaust filter changing the fuse, and if the fuse cover (SF-AA 50) is lost the plug must not be used until a suitable replacement is obtained. The Absorbs odours from the dirt in the dustbag.

Table of Contents