Auto-Off (Standby); Cup Warmer; Energy Saving; Coffee Temperature - DèLonghi ECAM 650.85 Instruction Manual

Please note!
To enable this function, the time must already be set correctly
(see section "8.1 Set time").
To enable auto-start, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press < (B10) or > (B8) until "
the display (B);
3. Select the function by pressing "
panel appears on the screen;
4. Press < or > corresponding to the hours and minutes until
the required auto-start time is displayed;
5. Press or
auto-start.
6. To confirm, press "
the settings menu by pressing "
" to go back to the homepage.
The auto-start time is now set and the corresponding symbol is
displayed to indicate that the function has been enabled.
Please note!
When the appliance is turned off using the main switch (A21),
the auto-start setting (if enabled) is lost.

8.7 Auto-off (standby)

Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-off, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press < (B10) or > (B8) until "
the display (B), together with the current selection (15 or
30 minutes, or 1, 2 or 3 hours);
3. Press " " to select the required value;
4. Press " " to go back to the homepage.
Auto-off is now programmed.

8.8 Cup warmer

To warm the cups before making coffee, you can enable the cup
warmer (A6) and rest the cups on the shelf.
1. Press " " (B2) to enter the menu;
2. Press < (B10) or > (B8) until "
on the display (B);
3. Press " " to enable-
cup warmer.
4. Press " " to go back to the homepage.
auto-start" appears on
". The time setting
to enable or disable
" (or cancel and go back to
"), then press "
AUTO-OFF" appears on
cup warmer" appears
or disable- the

8.9 Energy saving

Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press < (B10) or > (B8) until "
pears on the display (B);
3. Press " " to enable-
energy saving.
4. Press " " to go back to the homepage.
The corresponding symbol appears on the display alongside the
time to indicate that the function has been enabled.

8.10 Coffee temperature

To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press < (B10) or > (B8) until " COFFEE TEMPERATURE"
appears on the display (B) together with the current selec-
tion (LOW, MEDIUM, HIGH or MAX);
3. Press " " to select the required temperature;
4. Press " " to go back to the homepage.
Please note!
A different temperature can be set for each profile (see section
"17. Memorising your personal profile").

8.11 Water hardness

For instructions on setting water hardness, see section "20. Set-
ting water hardness".

8.12 Selecting the language

To modify the language of the display (B), proceed as follows:
"
1. Press " (B2) to enter the menu;
2. Press < (B10) or > (B8) until "
appears on the display;
3. Press " " : press < (B10) or > to display and select the
flag corresponding to the required language;
4. Press " " twice to go back to the homepage.

8.13 Beep

This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press < (B10) or > (B8) until "
display (B);
12
ENERGY SAVING" ap-
or disable-
SELECT LANGUAGE"
BEEP" appears on the