Yamaha Kodiak 450 Owner's Manual page 139

2. Remove the seat. (See page 4-13.)
3. Remove the blown fuse, and then install a
new fuse of the specified amperage.
WARNING! Always use a fuse of the spec-
ified rating, and never use a substitute ob-
ject in place of the proper fuse. An
improper fuse or a substitute object can
cause damage to the electrical system,
which could lead to a fire.
[EWB02173]
8-56
Specified fuses:
Main fuse:
40.0 A
Headlight fuse:
15.0 A
Ignition fuse:
10.0 A
Four-wheel-drive motor fuse:
3.0 A
Signaling system fuse:
10.0 A
Radiator fan motor fuse:
20.0 A
Auxiliary DC jack fuse:
10.0 A
Fuel injection system fuse:
10.0 A
EPS fuse:
40.0 A (YFM45KPAJ, YFM45KPHJ,
YFM45KPXJ)
4. Turn on the main switch, start the engine, and
then turn on the circuit in question.
5. If the fuse immediately blows again, have a
Yamaha dealer check the vehicle.
8