Yamaha Kodiak 450 Owner's Manual page 104

1. Torque wrench
Tightening torque:
Oil filter cartridge:
17 N·m (1.7 kgf·m, 13 lb·ft)
8
10. Install panels D and C.
11. Install the engine oil drain bolt and its new
gasket, and then tighten the bolt to the spec-
ified torque.
Tightening torque:
Engine oil drain bolt:
27 N·m (2.7 kgf·m, 20 lb·ft)
12. Refill with the specified amount of the recom-
mended engine oil.
Recommended oil:
1
See page 10-1.
Oil quantity:
Without oil filter cartridge replacement:
With oil filter cartridge replacement:
TIP
Be sure to wipe off spilled oil on any parts after the
engine and exhaust system have cooled down.
ECB00301
NOTICE
 In order to prevent clutch slippage (since the
engine oil also lubricates the clutch), do not
mix any chemical additives. Do not use oils
with a diesel specification of "CD" or oils of
a higher quality than specified. In addition,
do not use oils labeled "ENERGY CONSERV-
ING II" or higher.
 Make sure that no foreign material enters the
crankcase.
8-21
2.30 L (2.43 US qt, 2.02 Imp.qt)
2.40 L (2.54 US qt, 2.11 Imp.qt)