Yamaha Kodiak 450 Owner's Manual page 117

1
1. Tailpipe bolt
2. Remove the tailpipe by pulling it out of the
muffler, and then remove the gasket.
3. Tap the tailpipe lightly, and then use a wire
brush to remove any carbon deposits from
the spark arrester portion of the tailpipe and
inside of the tailpipe housing.
1
1. Gasket
2. Spark arrester
3. Tailpipe
4. Check the gasket for damage, and replace it
5. Make sure the gasket is properly positioned,
6. Install the bolts and tighten them to the spec-
Tightening torque:
8-34
1
2
if necessary.
then insert the tailpipe into the muffler and
align the bolt holes.
ified torque.
Tailpipe bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
3
8