Adjusting the Height of Cut
Note: The transport position is the highest height-of-cut
position at 115 mm (4-1/2 inches) as shown in
Figure
Figure 24
Adjusting the Anti-Scalp
Rollers
24.
Whenever you change the height of cut, adjust the height
of the anti-scalp rollers.
Note: Adjust the anti-scalp rollers so the rollers do not touch
the ground in normal, flat mowing areas.
1. Park the machine on a level surface and disengage the
blade-control switch.
2. Ensure that the parking brake is engaged, shut off the
engine, remove the key, and wait for all moving parts to
stop before leaving the operating position.
3. Adjust the anti-scalp rollers
closest height-of-cut position.
G010233
1. Anti-scalp roller
2. Bolt
g027504
22
(Figure
4
3
1
2
Figure 25
3. Flange nut
4. Hole spacing
25) to match the
g010233