Table of Contents
Advertisement
M
p
>
aIn
aGeS
Sight 'N Go Navigation
Sight 'N Go allows you to set a course to a point you
can see in the distance.
Using the Course Pointer or Bearing
Pointer
The bearing pointer and course pointer work
independently of each other. The bearing pointer
indicates the direction to your destination, and the
course pointer indicates your relationship to a course
line leading to the destination.
If the bearing pointer arrow is pointing straight up, for
example, you are going directly to your destination.
If it points any direction other than up, turn toward
that direction until the arrow is pointing up and then
continue in that direction. The bearing pointer always
points to the destination, regardless of the direction you
are moving. Most efficient if you must move around
obstacles (lakes, private property, etc.) in your path.
If you are using the course pointer option, and you
drift away from the line of travel from your original
location to your destination, the course deviation
Tracking System Owner's Manual F28 28
indicator (an arrow with horizontal dotted line)
provides graphic indication of drift (right or left)
according to the scale shown at the edge of the
compass ring.
Move to the right or left to get back on course. This is
most efficient if you are navigating on water or where
there are no major obstacles in your path. It also helps
you avoid hazards to either side of the course, such as
shoals or submerged rocks.
Data Fields
You can show 3 or 4 data fields on the Compass Page.
Altimeter Page
The Altimeter Page shows you the current elevation,
rate of ascent or descent, a profile of elevation
changes over distance or time, or a profile of pressure
changes over time.
The Status field at the bottom of the page shows the
current elevation and your current rate of ascent or
descent when moving. It can also show the ambient
pressure and time of measurement.
Tracking System Owner's Manual - Draft
1/16/2007 1:51:45 PM
Advertisement
Table of Contents
