Heading Setup - Garmin Oregon Series Owner's Manual

Customizing the Oregon
Heading Setup
On the Main Menu, touch Setup>
Heading.
Display-select the type of directional
heading shown on the compass:
• Directional Letters-sets the
compass page reading to directional
letters (N, S, E,
W).
• Numeric Degrees-sets the compass
page reading to degrees (0°-359°).
• Mils-sets the compass page reading
to mils (0 mils-l 000 mi Is).
North Reference-select the north
reference of the compass:
• True-sets true north as the heading
reference.
• Magnetic-automatically sets
the magnetic declination for your
location.
• Grid-sets grid north as the heading
reference (0°).
• User-allows you to set the magnetic
variation value.
Go To Line-select Bearing to show
the Bearing Pointer, which indicates
the direction to your destination. Touch
Course to select the Course Pointer,
which indicates your relationship to a
course line leading to the destination
(page 10).
Compass-select Auto to switch f.'om
an electronic compass to a GPS compass
when you are traveling at a higher rate of
speed for a set period of time. Select
Off
to tum the electronic compass off and
use the GPS compass.
Calibrate-calibrate the compass
(page
11).