Compass Page Options; Sight 'N Go Navigation - Garmin GPSMAP 60CSx Owner's Manual

Compass Page Options

Use the options menu to customize the Compass
Page. With the Compass Page open, press MENU. To
select an option, highlight it, and press ENTER.
Compass Page
Options Menu
The following options are available:
• Sight 'N Go—allows you to navigate to an
object within your sight by pointing the unit at it.
• Stop or Resume Navigation—turns active
navigation for a route or a Go To on or off.
• Recalculate— recalculates to path to a
destination.
• Course or Bearing Pointer—toggles between
the course pointer and the bearing pointer.
GPSMAP 60CSx Owner's Manual
• Data Fields—allows you to select the number
of data fields that appear on the Compass Page.
• Change Data Fields—allows you to select the
type of data you want to show in the data fields.
See page 93 for definitions of each option.
• Calibrate Compass—accesses the Compass
Calibration Page for calibrating the compass.
• Restore Defaults—returns to the factory
settings.

Sight 'N Go Navigation

Sight 'N Go allows you to set a course to a point you
can see in the distance.
To use Sight 'N Go to navigate:
1. Press MENU to open the Compass Page
Options Menu.
2. Highlight Sight 'N Go, and press ENTER to
start the Sight 'N Go feature. The compass
ring with pointer is in-line with the two sighting
marks on the case (the top arrow of the
ROCKER and tic at the top of display bezel.)
M P >
AIN AGES
51