Samsung SGH-i700 Series User Manual page 26

The Basics
7. Tap New.
8. Enter a name for the connection, select the modem
type, then select the correct baud rate for that modem.
9. If you need to enter the TCP/IP settings, tap Advanced,
then tap TCP/IP.
10. Select Use specific IP address.
11. Enter your IP address.
12. Tap .
13. Tap Next.
14. Enter the phone number for your Internet service
provider, then tap Finish to set up the modem
connection.
15. Tap to save the setting.
48
Using an Ethernet/LAN Card
To connect to the Internet or to your network using an
Ethernet/LAN card, you need:
• a computer with an Ethernet card.
• a computer set up for TCP/IP and a client for Microsoft
Networks.
• an Ethernet hub or a crossover cable to plug in your
Pocket PC.
• a Single-Slot or Dual-Slot PC Card Expansion Pack or a
CompactFlash (CF) Card Expansion Pack.
Insert your Ethernet/LAN card into your Pocket PC
Phone.
If your Ethernet/LAN card is not recognized, follow your
Ethernet card manufacturer's instructions to install the
Ethernet card driver.
Do one of the following:
• If you are using a DHCP server, the network settings
should be entered for you automatically.
• If you are not using a DHCP server, enter your network
settings.
1. From the Start menu, tap Setting.
2. Tap the Connections tab, then tap Network
Adapters.
The Basics
49