Chapter 10: Programs; Calculator - Samsung SGH-i700 Series User Manual

chapter
10
Programs

Calculator

The calculator allows you to perform general
mathematical functions, such as addition, subtraction,
multiplication, and division.
You can use the calculator to:
• perform basic calculations.
• store and retrieve values.
• display the last series of calculations.
To open the Calculator:
1. From the Start menu, tap Programs ¡ Calculator.
The number stored
in your memory is
displayed.
204
Clears the last
number you
entered.
Using the Calculator
The calculator includes several buttons to complete the
mathematical calculations.
• CE - The "CE" button clears the last number you
entered. Use this button if you make a mistake while
entering a number in the middle of a calculation. This
button enables you to re-enter the number without
starting the calculation over.
• C - The "C" button clears the entire calculation and
enables you to begin a fresh calculation.
• +/- - The "Plus/Minus" button toggles the current
number between a negative and positive value. If you
want to enter a negative number, enter the number
first and then press the +/- button.
• M+ - The "M+" button places the current number in
memory. Each new number you enter with the M+
button is added to the total stored in memory. The
number that you add can be either a calculated value
or any number you enter by pressing the number
buttons. Pressing this button has no effect on the
current calculation (or series of calculations); it
merely places the value into memory until it is
recalled.
• MR - The "MR" button recalls the stored value from
memory and inserts it in the current calculation.
• MC - The "MC" button clears any value that is stored
in the Calculator memory.
Programs
205