Physical Installation Stand Alone Cooler; Supported Mounting Position - Barco DP2K-36BLP User And Installation Manual

6. PHYSICAL INSTALLATION STAND ALONE COOLER

W
ARNING
place any object on the tubes so that free liquid flow can be guaranteed. Position the tubes so that there is
no contact with hot surfaces.
The tubes are pre-filled with liquid. It is not possible to refill the coolers or tubes on site. Hence take care to
protect the tubes and quick connectors
Overview
•

Supported mounting position

• Assembling the cooler housing
• Mounting the cooler housing on the cooler frame
• Preparing the stand alone frame
• Installing the brackets on the cooler housing
• Mounting the cooler housing on the frame
• Insert the cooler units
• Mount the filters
• Cabling and tubing
• Mount protection grid for the LCM cooler modules (option)
6.1 Supported mounting position
General
The Standalone cooler can be positioned flat on a solid surface (Floor Mounting) or fixed onto the wall in portrait or landscape modes
(Wall mounting).
A
Image 6-1
A Wall Mounting (Landscape).
B Wall Mounting (Portrait).
C Floor Mounting.
R5906753 DPXK BLP SERIES 20/11/2017
:
When using the projector with a stand alone cooler, do not stand on the cooling tubes or do not
B
6. Physical installation stand alone cooler
C
51