Optoma EX536 User Manual page 79

CAN NOT guarantee that the PC meeting the above conditions can operate normally .
Project USB display
1) Using USB-B cable to connect the projector to the USB display terminals.
Items in grey are not available.
2) Press the information source menu on the remote controlor the INPUT button on the control
panel, then select [USB display] in the input source menu.
3) Press the driver icon in the computer drive in the computer's task bar
in the pop-up menu bar.
Pop-up menu only display in English.
[Active audio] /[Disable audio]
[Play video] / [Pause video]
[Start / Stop]
[Exit]
NOTE
Resolution of the computer screen will be switched.
If the drive is not installed on the computer, the driver will be removed when the USB cable
is disconnected .
You need wait for a moment,if you want project computer screen.
Connect the USB cable directly to the computer's USB connector. When connecting the
USB hub, it may be abnormal.
The termination of USB
1) Remove the USB cable directly,when terminate USB monitor.
You never need follow "Remove Hardware Safely, when USB cable is not connected.
Sets up the output from the computer's audio.
Switch on playing and pausing images.
Sets up the output from the computer's image.
Gray means not optional
display
79
Useful function
,the select one item