Terminal - Optoma EX536 User Manual

Name and function of your projector
Terminals
① LAN terminal
Connect mesh cable to this terminal when
using network control and operate your
projector.
② USB-B connector
When using the "USB display" function,
connect your computer to this terminal via the
USB cable.
USB-A connector
When using the Memory Viewer function,
insert the USB memory directly to this

terminal.

HDMI HDMI MHL connector
Connect HDMI digital output signals or HDMI
MHL digital output signals to this terminal.
VGA IN 2/VGA OUT terminal
- Connect the output signal from a computer
to this terminal.
- For monitor output , output the signal from
to other monitors.
VIDEO IN terminal
Connect video output signal to this terminal.
MONO(L/R) terminal
A MoNo audio signal (A single audio terminal)
should be connected to the MONO (R / L)
interface.
AUDIO OUT terminal
Connect external audio devices to this terminal.
AUDIO IN terminal
Connect audio signal of the PC to this terminal.
RS-232C
When using the RS232 functional to operate
the projector, connect the serial communication
to this terminal.
VGA IN1/YPbPr/S-VIDEO IN
Connect RGB, YPbPr
terminal.
Remote Receiver (Rear)
Use the remote control to operate the projector.
⑬ Kensington Security Slot
When using the "Kensington Security Slot"
function, it will help users to deter theft of the
projector.
14
①
⑬
S-video signal to this