Auto Setup; Keystone - Optoma EX536 User Manual

Auto setup

Press the AUTO button on your remote controller to exe-
cute the following functions : Input search, Auto PC adj. ,
and Auto keystone.
1) Press button to select [Auto setup] menu.
2) Press <OK> button.
3) Press button to select required items.
Input search : Select this function to detect the signal,
then project images and input signals
automatically .
Auto PC adj. : Select this function to adjust [Fine sync],
[H Position], [V Position] and [H Size]
automatically, when projector input
analog signals.
Auto keystone:Select this function to correct vertical
distortion of the projected image
automatically.
Note:
One of Input search, Auto PC Adj. and Auto
keystone option should be set to On at least .
Plesse adjust the projector manually ,if the image
is displayed abnormal even if you have select
Auto keystone function.
When you set Project way as Ceiling / Front or
Ceiling / Rear , Auto keystone function is invaild.
When you set Project way as Auto ceiling /
front or Auto ceiling / rear , and users put their
projector in ceiling state, the Auto keystone
function will be invaild.

Keystone

Select this function to store or reset the Keystone or
some related setting after unpluging the AC power.
Press < MENU > button on the remote controller or on
the top control panel to display the OSD menu.Press
button to select the Expand menu ,then press
<OK> or button to enter
1) Press button to select [Keystone] menu.
2) Press <OK> button.
3) Press button to select required item.
4) Press <OK> button.
Auto setup
Keystone
51
Expand