Display; Auto Pc Adj; Fine Sync; H Position - Optoma EX536 User Manual

Display

Auto PC adj.

Select Auto PC Adj. function can adjusts Fine sync, H position, V position , H size to be compati-
ble with the computer automatically.
Menu operation
AUTO PC adj.
Press < MENU > button on the remote controller or
on the top control panel to display the OSD menu.
Press button to select the Display menu ,then
press <OK> or button.
1) Press button to select [Auto PC adj.] menu.
2) Press <OK> button.

Fine sync

(Only for PC signal input)
Adujust image to the best state When the image
jitters, or the image outline dims.
1) Press button to select [Fine sync] menu.
2) Press <OK> button.
3) Press button to adjust Fine sync .
Adjustment range is from 0 to +31. Please adjust to
the least interference state.

H Position

(Only for PC signal input)
On the premise that the relative position of both pro-
jector and the screen is set up right,you can move
the image horizontal position,if the position of the
projected image on the screen is deviated.
1) Press button to select [H Position] menu.
2) Press <OK> button.
3) Press button to adjust image H position.
Adjustment range is from -5 to +5.
AUTO PC adj. menu
Note:
The projector will perform Auto
PC Adjustment function auto-
matically,when its signal is input
may fail to work if computer
models is not compatible with
the input signal .
may fail to work if you select the
following system signal format：
480i, 576i, 480p, 576p, 720p,
1080i,1080p, or signals from the
HDMI terminal.
36