Front Panel
Take a moment to learn where the connections are as the remainder of the
manual will refer to them often.
Figure 1: MobileView 3000 front panel
1. USB 2.0: 2 ports for connecting USB-Flash-Drive to upload/download
configuration.
2. System Status LEDs: Indicators system status.
•
System failure LED: HDD full, HDD/System Temperature, Fan failure,
Videoloss
•
HDD failure LED: HDD power off, HDD failure
•
Copy LED: ON indicates that the system is upgrading firmware or
upload/download configuration
•
IGN LED: ON indicates that the Ignition is on
•
Record LED: ON indicates that the unit is recording.
•
Power LED: ON indicates Power on.
3. Alarm Acknowledge Button: Press to silence alarms.
4, Service Port: RJ-45 network connection 10/100Mbps Ethernet. There are
two LEDs on the LAN jack; Green LED means network is connected, amber
LED flickers when data is being exchanged.
MobileView 3000 User Manual
3