Authentication Method Information; Active Directory Configuration Information - IBM Storwize V7000 Quick Installation Manual

Table 15. Authentication method information
Field Value
Authentication
[ ] Microsoft Active Directory (AD)
Method
[ ] Lightweight Directory Access
Protocol (LDAP)
[ ] Samba Primary Domain Controller
(PDC) - NT4
[ ] None (requires configuring Network
information Service (NIS) for NFS
NetGroup support)
Options
[ ] Kerberos, compatible with
authentication method of LDAP only
[ ] Services For UNIX (SFU) - compatible
with authentication method of AD only
[ ] Network Information Service (NIS) -
NFS NetGroup support without User ID
Mapping - compatible with
authentication method of AD or PDC
only.
[ ] Network Information Service (NIS) -
NFS NetGroup support authentication
method with User ID Mapping -
compatible with authentication method
of AD or PDC only.
If you checked Microsoft Active Directory in the Authentication Method field of
Table 15, then you must complete this table.
Table 16. Active Directory Configuration Information
Field Value
Active Directory
Server Ip Address
Active Directory
Userid
Active Directory
Password
_____._____._____._____
_____._____._____._____
Note
Check one of the options.
If you check None, do not select either of the
following NIS options.
One or more of these optional capabilities may
be used to extend the capabilities of the
authentication method selected previously. If
none of these options are needed then leave this
row blank.
Note
This is the numeric IP address of the remote
Active Directory server (domain controller) on
the customer's network.
This is the user ID that must be provided when
communicating with the remote Active Directory
server. The following user ID and the password
are used to authenticate to the Active Directory
server.
This is the password that must be provided
when communicating with the remote Active
Directory server.
Chapter 3. Configuring the system
57