Step 1. Reviewing Your Packing Slip - IBM Storwize V7000 Quick Installation Manual

v Do not use rack-mounted devices as a shelf or workspace. Do not place any
Tools needed
A screwdriver is the only tool needed for the system installation. The screwdriver
can be either a flat-blade screwdriver or a cross head screwdriver.

Step 1. Reviewing your packing slip

After you open your box or boxes, locate your packing slip. Ensure that the items
that are listed in your packing slip match what is in the box. Ensure that any
optional items that you ordered are included in the list. Your shipment might
contain additional items depending on the order.
Control enclosure ship contents:
__ v Control enclosure (models 2076-112, 2076-124, 2076-312, or 2076-324). The last
__ v Rack-mounting hardware kit, including:
__ v Two power cords
__ v Drive assemblies or blank carriers (installed in the enclosure).
Other items shipped with control enclosure:
__ v Read first flyer
__ v Quality hotline flyer
__ v Environmental notices CD
__ v Environmental flyers
__ v Safety notices
2
Storwize V7000 Unified: Quick Installation Guide
install or to remove either unit from the rack.
object on top of rack-mounted devices.
two digits of the model number identify the number of drive slots, either 12
or 24.
__ – Two rails (right and left assembly)
__ – Two M5 x 15 Hex Phillips screws per rail (two rails)
__ – Two M5 x 15 Hex Phillips screws per chassis
Note: Two parts of the rail kit are attached to each side of the enclosure.
Verify the number of drives and the size of the drives.