Expansion enclosure 2
Control enclosure
Expansion enclosure 3
Figure 34. Attaching SAS cables to the enclosures
5. Attach SAS cables for additional expansion enclosures. You can add up to nine
6. Verify your cabling.
Step 11. Attaching the Ethernet cables
This task guides you through connecting both the internal and external Ethernet
connections for your system.
14
Expansion enclosure 1
a. Port 2 9 of the upper canister, expansion enclosure 1, attaches to Port 1
10 of the upper canister, expansion enclosure 3.
b. Port 2 11 of the lower canister, expansion enclosure 1, attaches to Port 1
12 of the lower canister, expansion enclosure 3.
expansion enclosures. You add a fourth expansion enclosure at 13 and 14
on expansion enclosure 2.
a. Add the enclosures alternately to chain 1, and then chain 2.
b. Use port 2 on the canisters that are already connected to attach to port 1 on
the canisters of the enclosures that you want to add.
6
8
5
1
7
3
2
9
11
4
10
12
Chapter 2. Performing the hardware installation
13
31