Standalone Battery Charger; Power Status Indicators; Figure 2-4 Front Panel Ac Charger/Adaptor Power Indicator; Table 4 Epoch 650 Power Status Indicators - Olympus EPOCH 650 User Manual

2.3

Standalone Battery Charger

The EPOCH 650 ultrasonic flaw detector battery can also be charged externally using
the optional standalone battery charger (P/N: EPXT-EC-X). Charging a battery
externally allows you to charge one battery while using another in the instrument. For
more information about the external charger, contact Olympus or your local sales
representative.
2.4

Power Status Indicators

The power status of the AC charger/adaptor and the battery charge status are
indicated by both the front panel AC charger/adaptor power indicator (see Figure 2-4
on page 47), and the user interface Battery/AC indicator (see Table 4 on page 47).

Figure 2-4 Front panel AC charger/adaptor power indicator

The status states of the Battery/AC indicator are shown in Table 4 on page 47. The
Battery/AC indicator is accurate after 5 to 10 minutes of use.
AC charger/adaptor
power indicator
Green
Red

Table 4 EPOCH 650 power status indicators

AC power
connected?
Yes Li-ion
not installed
Yes Li-ion
DMTA-10055-01EN, Rev. A, February 2015
Status
battery either fully charged, or
battery installed and charging
Powering the EPOCH 650
Battery/AC
indicator
47