Setting The Clock; Turning Off The Power Automatically -Sleep Timer - JVC UX-G290D Instruction Manual

Setting the Clock

Set the clock before using the Daily Timer (see pages 18
and 19) and the Sleep Timer (see the next column).
• This function is available only when the System is turned
off (on standby).
1
Turn off (standby) the System.
2
Activate the clock setting mode.
2
sec.
3
Adjust the hour.
4
Adjust the minute.
The built-in clock starts working.
To check the current time during play
The time is displayed for a few seconds.
If there is a power failure
The clock loses its settings and "0:00" flashes. You need to
set the clock again.
11
Turning Off the Power Automatically—
Sleep Timer
You can set the unit to turn off after a certain period of time.
1
Activate Sleep Timer.
2
sec.
2
Specify the time (in minutes).
(Canceled)
To check the time remaining until the shut-off time
2
sec.
• If you press the button repeatedly, you can change the shut-
off time.
SLEEP
SLEEP