Fluke DSX-600 Technical Reference Handbook page 55

 SAVE (yellow),
passed and Auto Save is off. When you tap SAVE, you can save
the results with an ID that you make or select. When you tap
TEST, you can select to save the results or do the test again and
not save the results.
UNSAVED RESULT: This button shows if Auto Save is off and

you go to the home screen when a test is completed. Tap this
button to see the result.
FIX LATER: This button shows if the test failed or had a PASS*

result and the result has not been saved.
 TEST AGAIN: This button shows if the test failed or had a PASS*
result. Tap this button to do the test again. If the test fails again,
you can tap FIX LATER to save the result if necessary.
When you look at a saved result that failed, tap TEST AGAIN to
do the test again for the same ID and with the same test settings
as the saved result.
The color of the FIX LATER and TEST AGAIN
buttons (yellow or gray) depends on which button
you tapped the last time you did a test that failed.
 TEST (yellow): This button shows if the test passed and Auto
Save is on. When Auto Save is on, the tester saves results with
the next available ID when the test is completed. When you tap
TEST, the tester does a test for the next available ID.
: The  key does the same function as the TEST button.

When TEST AGAIN shows, you can press  to do a test on
the next ID.
Buttons to Do Tests and Save Results
 TEST (gray): These buttons show if the test
Note
Chapter 2: Get Started
37