System Configuration; Accessing The Cli - Nortel 2221 Product Manual

Wireless lan access points

Hide thumbs Also See for 2221:

Table of Contents

Chapter 3 System Configuration

Chapter 3

System Configuration

The Access Point 2220/2221 can be configured by any Java-supported Web

browser including Internet Explorer 4.0 or above, or Netscape Navigator 6.0 or

above. Using the Web management interface, you may configure the Access Point

2220/2221. You can also use the command line interface (CLI) to manage the

Access Point 2220/2221.

You access the CLI using Telnet or a direct serial connection to the unit from a

terminal or personal computer (PC). You can use any terminal or PC with a

terminal emulator as the CLI command station. If using a direct connection via the

console port, make sure the terminal has the following features:

•

214853-B

Note: Both 802.11a and 802.11b radios are turned off on your Nortel

Networks Wireless LAN Access Point 2220/2221. You must configure

your Access Point 2220/2221 for your country before turning on the

802.11a and 802.11b radios.

For information on country-specific configuration, refer to

Country-specific Configuration for the Nortel Networks Wireless LAN

Access Point 2220/2221 (part number 215293-B). Go to

http://support.nortelnetworks.com/, select "Wireless LAN" and then

"WLAN Access Point 2220" or "WLAN Access Point 2221".

9600 bits per second (b/s), 8 data bits, 1 stop bit, no parity, no flow control

Serial terminal-emulation program

Null modem cable and connector to match the female DB-9 connector on the

Access Point 2220/2221 console port

Table of Contents

2220