Extreme Networks Summit X150-24t Hardware Installation Manual page 136

Confidential and proprietary information of Extreme Networks. © 2011 Extreme Networks, Inc.
SFP (Mini-GBIC), SFP+, QSFP+, XENPAK, and XFP Regulatory
Compliance
Extreme Networks pluggable optical modules meet the following regulatory requirements:
Class 1 Laser Product
G
EN60825-1+A2:2001 or later, European laser standard
G
FCC 21 CFR Chapter 1, Subchapter J in accordance with FDA & CDRH requirements
G
Application of CE Mark in accordance with 89/336/EEC EMC and 73/23/EEC Low Voltage
G
Directives
UL and/or CSA registered component for North America
G
47 CFR Part 15, Class A when installed into Extreme products
G
NOTE
Extreme Networks optical modules are tested to work in all supported Extreme Networks switches.
We recommend that all customers use Extreme Networks optical modules in their Extreme Networks switches.
Extreme Networks assumes no liability for third-party optical modules. Although Extreme Networks does not
block third-party optical modules, we cannot ensure that all third-party optical modules operate properly in all
Extreme Networks switches. The customer assumes all risks associated with using third-party optical modules in
Extreme Networks switches.
Summit Family Switches Hardware Installation Guide
All rights reserved. DRAFT. October 20, 2011
341