10. Tighten two M8 x 15mm Bolts (8) with two M8
Star Washers (5) into the Uprights (53, 54).
See step 9. Tighten the M8 x 15mm Bolts (8)
used in step 9.
With the help of a second person, carefully
lower the Uprights (53, 54) to the floor.
11. Attach the ground wire on the Wire Harness (39)
to the indicated hole in the Base (52) with an M4
x 10mm Screw (84).
10
5
8
11
52
Hole
Ground Wire
10
53
8 5
84
39
54