Ring Style; Setting Ring Style; Set Volume; Setting Volume - Motorola MTP850 Feature User Manual

82 | Main Menu
4 Select the required setting, and press Select.
Note: If you choose Duplex Calls, Simplex Calls or Messages, the settings available are Vibe then
Ring (for messages it is Vibe & Ring), Vibe Only or Ring Only. If you choose Group Call, the
settings available are Vibe On or Vibe Off only.

Ring Style

This sub-menu allows you to set the incoming call ring style.

Setting Ring Style

Procedure:
1 From the home screen, press the
2 Select Setup → Ring Style.
3 Select one of the following:
• Duplex — To set the new ring style to all duplex calls.
• Simplex — To set the new ring style to all simplex calls.
Note: Upon entry into this sub-menu, the display shows the current ring style used.
4 Scroll to the desired style and press Select.
Note: New ring style is played immediately for a few seconds. If necessary, adjust the volume level.

Set Volume

This menu item allows you to adjust the Simplex, Duplex, Earpiece, Speaker, and Keypad tone volume.
Related Links
Volume Adjustment Mode

Setting Volume

Procedure:
1 From the home screen, press the
2 Select Setup → Set Volume.
3 Select one of the following:
• Duplex Vol — sets the volume level for duplex ringtones.
• Simplex Vol — sets the volume level for simplex ringtones.
• Earpiece Vol — sets the volume level for the earpiece.
• Speaker Vol — sets the volume level for the speaker.
• Keypad Vol — sets the volume level for keypad tones.
Note: If the display shows only one option Volume, you can adjust all of the above settings at once.
You have the option to change the settings individually when the Volume Adj. Mode is set to
Individual.
4 Press right or left N
Note: When the battery level is low it is not recommended to attach the 4 Ohm speaker to the radio as it
can cause reset or shutdown of the radio.
Related Links
Setting Volume Adjustment Mode
Send Feedback | |
key.
MENU
on page 84
key.
MENU
key to change the value.
AVIGATION
on page 85