Motorola MTP850 Feature User Manual page 125

Hide thumbs Also See for MTP850:
Table of Contents

Advertisement

Message
No Selected Scan List
No Service
Not Allowed To Initiate Call
Not Allowed To Transmit
Single TalkGroup Only
Overheating, Please Turn Radio Off
Party Busy
Party Not Available
Please Try Again
Please Wait Connecting
Reconnect Radio to the Charger
Registration Failure
Repeater available
Repeater not available
Service Denied
Service Not Available
Service Restricted
TalkGrp ... cannot be deleted
Try Again Later
Radio Disabled
Unit is OK
Warn:
Unit Not Attached
Unassigned Button
Message Description
You selected an empty network list.
Your radio is out of coverage.
You are not allowed to dial a number which is not in the address
book.
Release the PTT button and try again later. You are not allowed to
send a text message or a status message to a number which is not in
the address book.
There is only one programmed entry in the scrolling list.
Your radio turns off. Keep it turned off for 5 minutes.
Called radio is busy.
Called radio is out-of-range or turned off. Please try again later.
You could not call.
A message during startup.
The radio cannot detect the charger. Ensure that the charger is
connected correctly and that the pins on the radio and the charger are
clean.
Your radio could not register within the system. Please try again later.
Your radio has connected to a repeater.
Your radio cannot connect to a repeater, or connection has been lost.
Invalid number. Call your service provider.
This service is not available on the current network.
This service or feature is restricted by your service provider, it has
not been purchased, or it is not available.
Your service provider set this group so you cannot delete it from the
favorite talkgroup folder.
The requested service is temporarily unavailable.
Check with your service provider.
Self-test error. A minor fault has been detected. Your radio is still
fully operative. If this error recur, note the error code and contact
service.
You radio could not attach to the system. The talkgroup may not be
defined in the system. Please try another group.
The message is displayed when no feature is assigned to a button.
Troubleshooting | 125
| |
Send Feedback

Advertisement

Table of Contents
loading

Table of Contents