Invisible Emergency; Emergency Mode By Dialing; Disaster Alert; Initializing Disaster Alert Calls - Motorola MTP850 Feature User Manual

58 | Modes

Invisible Emergency

It is possible for the service provider to disable visual and audible indications of performing Emergency Operations
on the radio. The purpose of this feature is to hide the fact of using Emergency Operations in a critical situation (e.g.
direct attack on the user) and thus to provide additional layer of safety.

Emergency Mode by Dialing

This feature allows you to trigger Emergency Mode by dialing a predefined number. It initiates the same Emergency
services as you would use the E
Note: If this Emergency Mode was triggered by Emergency number (not by E
press the E
ND

Disaster Alert

Disaster Alert call is a broadcast emergency call initiated by the radio, with emergency pre-emptive priority that
everyone in a broadcast area can hear. This feature is specifically designed for catastrophic situations, such as
earthquakes, and has the highest priority over other calls. All radios under Disaster Alert display emergency
notification on their screens. The alert message, its duration and destination talkgroup can be configured in the
codeplug.
In order to initiate Disaster Alert, switch the radio to Disaster Alert mode and press PTT button. When the call ends,
the radio will exit the Disaster Alert state.
During Disaster Alert, other functionality is impacted:
• When Disaster Alert begins, any other ongoing services are terminated.
• No other services can interrupt this type of call.
• Hot Mic functionality cannot be used.
• Speech can only be in Clear mode, even if any of the encryption services are enabled. The only exception is E2E
Encryption.
Note: Not all infrastructures support this feature. Please consult with your service provider before enabling
this feature.

Initializing Disaster Alert Calls

Procedure:
1 From the home screen, press the
2 Select More . . . → Services → Disaster Alert.
Your radio enters Disaster Alert Mode and it displays Disaster Alert icon.
3 To start the call press PTT.
Your radio displays Disaster AlertIn Use.

Exiting Emergency Operations

Prerequisites: Make sure that your radio is engaged in Emergency Operations.
Procedure:
1 If your radio screen displays Emergency Mic On, press End.
2 Press and hold Exit.
Note: If an Emergency Operation was triggered by Emergency number (not by E
can press the E
Send Feedback | |
button. Your radio can store up to eight Emergency numbers.
MERGENCY
key to exit the Emergency Mode.
key.
MENU
key to exit the Emergency Operation.
ND
button), you can
MERGENCY
button), you
MERGENCY