Location; Viewing Your Position; Changing Gps Accuracy; Packet Data - Motorola MTP850 Feature User Manual

Location

See the GPS Location Service for more information.
Related Links
GPS Location Service

Viewing Your Position

Procedure:
1 From the home screen, press the
2 Select More . . . → Location → Position.
3 Scroll to view the results about the last time your location was calculated.
Note: To refresh your position:
• Select Position — the radio refreshes its position automatically
• Press Refresh

Changing GPS Accuracy

Procedure:
1 From the home screen, press the
2 Select More . . . → Location → Accuracy.
3 Select one of the following:
• Medium (default) — Power consumption optimization is combined with less position accuracy.
• High – Better position accuracy is combined with less power consumption optimization.
Note: If connected to an external charging device, the radio automatically enters the High mode.

Packet Data

The Packet Data (PD) Service allows you to transfer data in a TETRA system using the Internet Protocol (IP).
Note: To transfer data from a standard computer over the air, connect the computer via the data cable
PMKN4025 with your radio. Your service provider has to setup additional applications on your computer.
If set up by your service provider it is possible to accelerate the transmission by using the Multi-Slot Packet Data
(MSPD) Service.
Note: This is a selling feature.

Viewing Data Statistics

Procedure:
1 From the home screen, press the
2 Select More . . . → Packet Data.
on page 61
key.
MENU
key.
MENU
key.
MENU
Main Menu | 103
| | Send Feedback